Product Description
Sandwich Panel Production Machine EPS Cement Wall Panel Machine With Calcium Silicate Board
1.Main Feasture:
(1)The machine adopts PLC and touch screen control, automatic filling, electronic weighing, temperature control, material level control to realize automatic production.
(2) With the same machine, it can adjust the panel size and thickness. The thickness will be from 60 to 180mm.
(3) The closed constant pressure foamng barrel features of high heating efficiency and saves stem.
(4)High precise guiding pressure reducing valve controls the temperature and steam pressure of the
closed barrel, ensuring the outcome pressure of the valve constant and the inner temperature controlled
wihin ±1%, which keeps the foamed material equal and prevents the bead agglomerate because of the
bad temperature control.
(5)With photoelectric or vibration sensor to control material level, ensuring density tolerance within ±3%.
(6)The machine is equipped with fluidized bed dryer, including drying, automatic sieving, depluming and
material conveying to silos.
(7)Most components are of world-famous brands, with reliable performance, stable quality, long service
life and low maintenance cost.
(8)The machine can realize the primary and second expansion
Introduction of Hongfa EPS light weight wall panel production line
1. Materials of Hongfa Brand EPS Wall Panel
Core Material: EPS( Foam polystyrene, Cement and fly ash,etc)
Board materials: Calcium Silicate Board/ Cement Fibre Board/No Board
2. Common Specifications of EPS cement wall sandwich panel
L*W*T: 2440mm*610mm*50mm/60mm/75mm/90mm/100mm/120mm/150mm.
2270mm* 610mm*50mm/60mm/75mm/90mm/100mm/120mm/150mm/180mm.
(Other sizes can be customised)
3. Applied range of light weight EPS wall panel
For interior and exterior wall partition on steel or concrete structure building, new construction or renovations. It can be widely applied to wall materials of various high and low buildings such as bank, office building, hospital, school, hotel, shopping mall, amusement, old house reconstruction, residence and workshop.
4. Advantages of Hongfa wall sandwich panel
A:Light weight
B:Excellent sound insulation
C:Heat Insulation
D:Waterproof Fire proof
E:Energy Efficient Environmental
F:Convenient construction
G:High Intensity without deformation.
Common Raw Materials Proportion:
| Cement |
Sand |
Mineral admixtures |
Water |
Addictive |
Eps (M3) |
| 1 |
1.0 - 2.0 |
0.5 - 1.2 |
0.55 - 0.65 |
0.04 - 0.06 |
0.5 - 0.85m3 |
| weight ratio |
Volume per M3 |
Reference Workers needed:
(take capacity 200,000/yearly as example)
Raw materials, boiler and EPS expending:1
Mixing:1
Pouring:1
Pre insert silica panel:1
Demoulding:1
Total: 5
Our Services
Building Cement Light Weight Concrete Foam Machine Precast Concrete Wall Panel Machine
The three types of the cement wall panel forming machine:
1: Horizontal type EPS wall panel forming machine: high level of automatic operation,fewer workers required.
| Horizontal Type |
| Overall dimensions |
Power |
Output with different thickness/pieces per mold |
| 60mm |
75mm |
90mm |
100mm |
120mm |
150mm |
| 2750x2504x1359 mm |
3kw |
16pcs |
14pcs |
12pcs |
12pcs |
10pcs |
8pcs |
2: Automatic vertical type: automatic operation,high output,fewer workers required.
| Automatic Vertical Type |
| Overall dimensions |
Power |
Output with different thickness/pieces per mold |
| 60mm |
75mm |
90mm |
100mm |
120mm |
150mm |
| 3380x3200x2680 mm |
4kw |
40pcs |
36pcs |
32pcs |
30pcs |
26pcs |
22pcs |
3: Manual vertical type partition wall board making machine: Manual operation,the highest output amount the three types, but requires more workers.
| Manual Vertical Type |
| Overall dimensions |
Power |
Output with different thickness/pieces per mold |
| 60mm |
75mm |
90mm |
100mm |
120mm |
150mm |
| 3600x1320x2800 mm |
no |
58pcs |
50pcs |
42pcs |
40pcs |
34pcs |
28pcs |
Introduction of Hongfa EPS light weight wall panel production line
1. Materials of Hongfa Brand EPS Wall Panel
Core Material: EPS( Foam polystyrene, Cement and fly ash.)
Board materials: Calcium Silicate Board/ Cement Fibre Board/No Board
2. Common Specifications of EPS cement wall sandwich panel
L*W*T: 2440mm*610mm*50mm/60mm/75mm/90mm/100mm/120mm/150mm.
2270mm* 610mm*50mm/60mm/75mm/90mm/100mm/120mm/150mm/180mm.
(Other sizes can be customised by our company)
EPS wall panel applications
The EPS panel is weidely used for partition board in non-bearing wall,exterior wall in steel structure ,roof and floor.It is popular for new construction or renovation and expansion building ,such as house construction,fire walls ,fences,footings,retaining walls ,bungalows,high-rise buildings,basements,walk-in fridges,hotels,schools,shopping malls,villas and etc.
Other main machines part for complete production line
1. Mixing plant
HONGFA mixing plant consists of mixer, movable infusion unit and aggregating system. It can mix all raw material automatically and record every data for production. 3.6CBM capacity mixer guarantees infusion efficiency. It only needs about 15seconds to finish a panel with size 2440*610*100mm.
2. De-molding machine
De-molding machine can pull the cured panels out deirectly, Hongfa design it based on 6 years panel manufacturing experience, make it possible that demolding machine is movable, after demolding, the molds can be installed immediately without any delay. Multiwork is possible so efficiency is triple compared to traditional vertical manual and semi horizontal production line.
3.Recycling unit
Recycling unit can save eveything in production, waste slurry settling in underground mixer, the cement and sand will be pumped into mixer again for next mixing cycle. Keep production clean and make waste recycling, cost saving.
Other equipment of the panel production line:Automatic control syste,working table,Water timer and Water pump,scales, hopper,Rail,Ferry,...
We also according to customers' production quantity to offer relevant equipments.If you want to know more,welcome to contact me,thanks.
Customer Feedback
FAQ
Shipping port: Qingdao or Fangcheng Port China.
Payment:30% as down deposit by T/T ,70% as the balance paid before loading
Guarantee Period: three year after installation finished at buyer's factory.
The above price includes one mold for free, extra molds should be paid according to design.
The video is available to send to you, please contact me.
Package & Delivery
Packing: Naked packing or stretch film packing or according to customers' requirements
Delivery time: Within 40 days after receipt of deposit and moulds confirmation from buyer
After sale service
Guarantee for three year and after sale service for whole life.To offer free design,free technology support and free machine maintenance trainning.
We will provide you with a set of spare parts for free!
Company Profile
Guangxi Hongfa Heavy Machinery Group
Guangxi Hongfa Heavy Machinery Group was established in 1990, is one of the largest block making manufacturer and leading supplier of the building block industry in China,as an ISO9001-2000 certificate and "Famous Brand in Guangxi"enterprise and member of China Building Block Association.
Hongfa Machinery'Honor
1.One of Top Ten Influential Brands in China Brick &Tile Industry
2.China National Enterprice Abiding By Contract & Keeping Good Faith
3.Quality and Credibility of the Dual-protectionb Demonstration Unit
4.High and New Technology Enterprise
5.Famous Trademark of China
6.Star Enterprise with China Patent
7.AAA Grade Credit Enterprise
8.Consumer Satisfaction Unit
9.One of Top 100 building Material Industry Brands of China
10.One of Top Ten Good Faith Units
11.Advanced Exporter in Guangxi Province
12.Advance Quality Management Unit
Exhibitions & cooperations
Hongfa, as a top brand enterprise in China, our products are also exported to Russia, Brazil, Thailand, Indonesia, Vietnam, Angola, Bangladesh, India, Australia, Sudan, etc., 96 countries and regions, deeply welcomed by clients from all around the world.
Hongfa Machinery Group Main Products :
Our factory now mainly produces cement block brick making machines,AAC block production line,Lightweight Wall Panel Machine Production Line,concrete mixing plant,artificial quartz stone equipment,cement pipe machine,color tile machine,organic fertilizer equipment,Dust removal, desulfurization and denitrification,Photo-oxygen catalytic combustion equipment hydroelectric equipment,wind power equipment,Mining Equipment,cement production equipment,sugarcane sugar milling equipment,Assembled steel structure and so on.
Automatic Block Making:
QT12-15D QT12-15 QT10-15D QT10-15 QT9-15 QT8-15D
QT8-15B QT6-15D QT6-15C QT6-15B QT4-15D QT4-15C
QT4-15B QT4-20C QTJ4-25
Semi-automatic:
QTJ4-35B2 QTJ4-40B2
Semi-automatic egg-laying machine:
QTY4-30 QMJ4-45 QTJ2-45 JMQ-6A
Color Paver Color tile forming machine:
QT3-20 SMY8-150
HF-800 pipe-making machine HF-2000 pipe-making machine
Concrete Mixing Plant:
HZS25 HZS35 HZS50 HZS60 HZS series
AAC Block production line : 50000~300000M3/Year
When you plan to purchase a certain machine, suggesting to take care below points:
1. What is the brand? ( Now a lot companies embezzle our brand, pls take note our prevention fake-mark.)
2. Does this brand has good reputation and sell well in the market?(we got good reputation and are the biggest supplier in China)
3. What is the materials they used? Manganese steel or A3 steel? (We use Manganese steel which stronger than A3 steel)
4.The price cover to what equipment?( pls refer to our quotation list)
Please not hesitate to contact us if you are interested in any kinds of products.
Contact Information:
Foreign Trade Dept. :Wendy Deng
Guangxi Hongfa Heavy Machinery Co.,Ltd.
Wesite:http://gxhongfa.en.made-in-china.com
Tel:0086-17776611790
0086-771-5672282
0086-771-6036912
Fax: 0086-771-6036901
Factory add: Linyi city, Shandong province & Nanning city, Guangxi Province, China
Audited Supplier 
){kind=link}