Product Description
Low Price Sandwich Wall Panel Manufacturing Machine Foam Concrete Cement Brick Machine
(1). What is the main materials of the EPS Wall Panel Machine used to make the light weight sandwich wall board?
Main raw materials of EPS wall panel are: fly ash, slag, ceramsite, portland cement and EPS foam particles, the production process is simple and low cost.
(2). The Concrete wall panel is suitable for modern building standard.
The overall world development trend of brick from clay to non-clay, from solid to hollow, from the small to large, from heavy to lightweight, from low intensity to high-strength, from high to low energy consumption. And the project is stressed to wall lightweight, high strength, thermal insulation, waste utilization, energy conservation and other functions.Therefore, the implementation of the project is imperative. The panel can meet the requirements of the modern building standard.
(3). Rich and Extensive Sources of Raw Materials for making EPS wall board.
The production of wall materials must be rich and extensive sources of raw materials. The main raw materials of wall panel are industrial residues,fly ash, slag and EPS foam particles,which not only is recyclable and reducing pollution,but also uses inexpensive ordinary chemical raw materials.The above two kinds of sources of raw materials are abundant and extensive.
(4). Obvious Advantages of Industry Competition
(5)EPS new green wall panel has five features:
(A) Lightweight: The raw materials used are Lightweight aggregates, fly ash,etc, non-reinforced concrete, gravel and other heavy feedstock. So it has the characteristics of lightweight, which is only 1/16 weight of the brick and concrete structure.It can significantly reduce the vertical load of the building structure and reduces building weight and project cost.
(B)Insulation Resistance: As this new wall panel is core of EPS insulation materials, which insulation performance is extremely advantageous and meet the building energy efficiency design standards, and rank first among similar products.
(C) Permeability Resistance: The bibulous rate of this new wall panel is only 3.3%,which has reached the international advanced level in the same industry.
(D) Fireproof performance: this kind of wall panel is non-burning, and according to the testing, it is reasonable fireproof materials, for the 90mm thickness wall panel, the fireproof performance can be more 3 hours.
(E) Soundproofing: As new wall panel is using EPS as core, it has good sound insulation and air aspiration, which is more than 40 db sound insulation.
(6). With low business risk for establishing the EPS sandwich wall panel machinery.
(A) long-term stability advantages: Due to the limit of functional requirements of the restrictions and sources of raw materials needed to be broad and rich , but also by limiting the requirements of the human environment, the wall construction material development developers is relatively difficult.Once this kind of wall material is successfully developed and is recognized by the government and society,its competitive advantage will be relatively stable and long-term business in the market.
(B) Mechanization in production, so less workers but high output and stability.
(C) It is a comprehensive utilization of the industrial wastes project, and will get a great support from the Government.
Our Services
The three types of the cement wall board forming machine:
1: Horizontal type EPS wall board forming machine: high level of automatic operation,fewer workers required.
| Horizontal Type |
| Overall dimensions |
Power |
Output with different thickness/pieces per mold |
| 60mm |
75mm |
90mm |
100mm |
120mm |
150mm |
| 2750x2504x1359 mm |
3kw |
16pcs |
14pcs |
12pcs |
12pcs |
10pcs |
8pcs |
2: Automatic vertical type:automatic operation,high output,fewer workers required.
| Automatic Vertical Type |
| Overall dimensions |
Power |
Output with different thickness/pieces per mold |
| 60mm |
75mm |
90mm |
100mm |
120mm |
150mm |
| 3380x3200x2680 mm |
4kw |
40pcs |
36pcs |
32pcs |
30pcs |
26pcs |
22pcs |
3: Manual vertical type partition wall board making machine: Manual operation,the highest output amount the three types, but requires more workers.
| Manual Vertical Type |
| Overall dimensions |
Power |
Output with different thickness/pieces per mold |
| 60mm |
75mm |
90mm |
100mm |
120mm |
150mm |
| 3600x1320x2800 mm |
no |
58pcs |
50pcs |
42pcs |
40pcs |
34pcs |
28pcs |
EPS wall panel applications
The EPS panel is weidely used for partition board in non-bearing wall,exterior wall in steel structure ,roof and floor.It is popular for new construction or renovation and expansion building ,such as house construction,fire walls ,fences,footings,retaining walls ,bungalows,high-rise buildings,basements,walk-in fridges,hotels,schools,shopping malls,villas and etc.
Other main machines part for complete production line
1. Mixing plant
HONGFA mixing plant consists of mixer, movable infusion unit and aggregating system. It can mix all raw material automatically and record every data for production. 3.6CBM capacity mixer guarantees infusion efficiency. It only needs about 15seconds to finish a panel with size 2440*610*100mm.
2. De-molding machine
De-molding machine can pull the cured panels out deirectly, Hongfa design it based on 6 years panel manufacturing experience, make it possible that demolding machine is movable, after demolding, the molds can be installed immediately without any delay. Multiwork is possible so efficiency is triple compared to traditional vertical manual and semi horizontal production line.
3.Recycling unit
Recycling unit can save eveything in production, waste slurry settling in underground mixer, the cement and sand will be pumped into mixer again for next mixing cycle. Keep production clean and make waste recycling, cost saving.
Other equipment of the panel production line:Automatic control syste,working table,Water timer and Water pump,scales, hopper,Rail,Ferry,...
We also according to customers' production quantity to offer relevant equipments.If you want to know more,welcome to contact me,thanks.
Packaging & Shipping
Sea Worthy Package of Automatic Operation Vertical EPS Partion Wall Panel Making Machine
FAQ
Shipping port: Qingdao or Fangcheng Port China.
Payment:30% as down deposit by T/T ,70% as the balance paid before loading
Guarantee Period: Three year after installation finished at buyer's factory.
The above price includes one mold for free, extra molds should be paid according to design.
The video is available to send to you, please contact me.
After sale service
Guarantee for Three year and after sale service for whole life.To offer free design,free technology support and free machine maintenance trainning.
We will provide you with a set of spare parts for free!
Company Profile
Guangxi Hongfa Heavy Machinery Group is your best choice
Guangxi Hongfa Heavy Machinery Group was established in 1990, is one of the largest block making manufacturer and leading supplier of the building block industry in China,as an ISO9001-2000 certificate and "Famous Brand in Guangxi"enterprise and member of China Building Block Association.
Hongfa Machinery'Honor
1.One of Top Ten Influential Brands in China Brick &Tile Industry
2.China National Enterprice Abiding By Contract & Keeping Good Faith
3.Quality and Credibility of the Dual-protectionb Demonstration Unit
4.High and New Technology Enterprise
5.Famous Trademark of China
6.Star Enterprise with China Patent
7.AAA Grade Credit Enterprise
8.Consumer Satisfaction Unit
9.One of Top 100 building Material Industry Brands of China
10.One of Top Ten Good Faith Units
11.Advanced Exporter in Guangxi Province
12.Advance Quality Management Unit
Exhibitions & cooperations
Hongfa, as a top brand enterprise in China, our products are also exported to Russia, Brazil, Thailand, Indonesia, Vietnam, Angola, Bangladesh, India, Australia, Sudan, etc., 96 countries and regions, deeply welcomed by clients from all around the world.
Hongfa Machinery Group Main Products :
Our factory now mainly produces cement block brick making machines,AAC block production line,Lightweight Wall Panel Machine Production Line,concrete mixing plant,artificial quartz stone equipment,cement pipe machine,color tile machine,organic fertilizer equipment,Dust removal, desulfurization and denitrification,Photo-oxygen catalytic combustion equipment hydroelectric equipment,wind power equipment,Mining Equipment,cement production equipment,sugarcane sugar milling equipment,Assembled steel structure and so on.
Automatic Block Making:
QT12-15D QT12-15 QT10-15D QT10-15 QT9-15 QT8-15D
QT8-15B QT6-15D QT6-15C QT6-15B QT4-15D QT4-15C
QT4-15B QT4-20C QTJ4-25
Semi-automatic:
QTJ4-35B2 QTJ4-40B2
Semi-automatic egg-laying machine:
QTY4-30 QMJ4-45 QTJ2-45 JMQ-6A
Color Paver Color tile forming machine:
QT3-20 SMY8-150
HF-800 pipe-making machine HF-2000 pipe-making machine
Concrete Mixing Plant:
HZS25 HZS35 HZS50 HZS60 HZS series
AAC Block production line : 50000~300000M3/Year
When you plan to purchase a certain machine, suggesting to take care below points:
1. What is the brand? ( Now a lot companies embezzle our brand, pls take note our prevention fake-mark.)
2. Does this brand has good reputation and sell well in the market?(we got good reputation and are the biggest supplier in China)
3. What is the materials they used? Manganese steel or A3 steel? (We use Manganese steel which stronger than A3 steel)
4. What is the lifetime of the mold? ( our mold can use 900,000 - 1200,000 times)
5. What is the capacity of this machine? (17280-23040 pcs/8 hours hollow brick)
6.What is the guarantee period? ( We guarantee for three year)
7.The price cover to what equipment?( pls refer to our quotation list)
Please not hesitate to contact us if you are interested in any kinds of products.
Contact Information:
Foreign Trade Dept. :Wendy Deng
Guangxi Hongfa Heavy Machinery Co.,Ltd.
Wesite:http://gxhongfa.en.made-in-china.com
Tel:0086-17776611790
0086-771-5672282
0086-771-6036912
Fax: 0086-771-6036901
Factory add: Linyi city, Shandong province & Nanning city, Guangxi Province, China
Audited Supplier 
){kind=link}