Automatic Concrete Machine Cement Pipe Making Machine Water Tube Making Machine Pipe Machine

• After-sales Service: Provide
• Warranty: Provide
• Pipe Material: Concrete
• Condition: New
• Customized: Customized
• Theory: Inverter
• Model NO.: pipe making machine
• Application: Industry, Decoration
• Type: Pipe Molding Machine
• Transport Package: Sea
• Specification: 1840*1700**4000mm
• Trademark: hongfa
• Origin: China

Product Description

 

Pipe machine advantages

HONGFA vertical extruding pipe-making machine is the ideal equipment to manufacture cement pipe. Reasonable design ,reliable and simple operation ,accord with state standard GB11836-89.This machine mixes river sand ,tubular products of inner diameter 200-1000mm .

Dimension :	1840×1700×4000 mm
Reducer rate :	1:5.8
Mould length :	1000 mm
Cycle Time :	5-10 mins(depends on the dimension)
Whole power :	11.75kw
Motor Power :	7.5kw
Mould diameter (inside mm):	200mm, 300mm, 400mm, 500mm, 600mm, 700mm, 800mm, 1000mm
Wall Thickness:	30mm for dia 200mm,300mm,  80mm for dia 800mm,100mm for dia 1000mm
Speed of main shaft:	45 rolls / min

Pipes advantages

Average wall thickness, smooth inner and outer wall, good impermeability, high compressive strength, low cost, firm and reliable tie-in, convenient construction, high efficiency, and instant film-releasing maintenance, etc.

CONTACT US: Ms Somi    whasapp :[phone]

CONTACT US: Ms Somi    whasapp :[phone]

Main Technical parameters

Mould inner diameter and thickness (mm)
Diameter	200	300	400	500	600	700	800	1000
Thickness	30	30	40	50	60	70	80	100

1) Flat Joint

Flat pipe is an joint form of cement pipe earlier, which is easy manufacture, high in production efficiency and low in
manufacturing cost; the interface sealing adopts steel mesh concrete rag tape is a rigid connection, but its sealing effect and seismic performance are poor. If the foundation displacement causes the interface to be opened, the sewage will pollute the underground soil, causing great social and environmental inconvenience, so this interface is used less.

2)Socket joint

The socket type interface adopts rubber ring seal to stop water, which is flexible connection. The interface insertion depth is 80-100 mm, and the interface has a relative rotation angle of 1.5°. The cement pipe of this interface has good seismic performance.The pipe base is made of sandstone foundation or concrete foundation. high speed in installation. However, large-diameter cement pipes are not suitable for socket-type interfaces because large-mouth cement pipes produce circumferential cracks.

3)Flexible rabbet joint

The flexible rabbet joint form is mainly suitable for cement pipes with a diameter of ≥d1200. The interface form is also a
flexible connection. The interface has the advantages of a socket type and is more prominent than the socket type, but it also has a remarkable feature that the socket type is not suitable for the large diameter pipe.. The depth of the socket pipe joint is not easy to control, and it is not easy to be dense when backfilling. The stress at the transition of the pipe socket is concentrated.In serious cases, the pipe body will have circumferential cracks, which will affect the service life of the pipe. The pipe body of the flexible joint pipe has good contact with the foundation. It is evenly loaded when subjected to load force, so it is safer to use; the outer wall of the socket of the socket tube is a sloped surface, so it is difficult to control the leakage when building the inspection well, so the flexible rabbet tube will be improved a lot; The rabbet tube can also be used as a top tube.

CONTACT US: Ms Somi    whasapp :[phone]

CONTACT US: Ms Somi    whasapp :[phone]

Pipe application:The water supply and sewage works in the town.

CONTACT US: Ms Somi    whasapp :[phone]

We also have other type of machine to produce pipes--Horizontal pipe making machine

CONTACT US: Ms Somi    whasapp :[phone]