Expanding polystyrene lightweight panel machine
Light Weight Wall Board Machine EPS Cement Wall Board Making Machine With 50000m2 to 500000m2/year Output
What is Light Weight Wall Board/EPS Cement Wall Board:
EPS sandwich cement wall board is a new type of high-grade light wall panel material with EPS mortar as core material, calcium silicate board as the surface material and properly mixed with fly ash, slag and additives, and the panel formed by the EPS wall board making machine.
Product size: length 2440mm, width 610mm, thickness 60-180mm (size and thickness can be adjusted). The two surfaces of the new type composite sandwich board are composed of high strength water resistant calcium silicate board with good waterproof properties; good thermal insulation EPS bonding mortar as Core material; The product is of structural function , waterproof and thermal insulation performance, mainly used as building wall partition.
This kind of EPS Sandwich Wall Board is provided with comprehensive advantage that other wall panel can't compare with: solid, lightweight, thin body, high strength, impact resistance, strong hanging force, heat insulation, sound insulation, fire prevention, waterproof, easy cutting, can be arbitrary slot, without rendering coat, dry decoration, environmental protection. Achieving the purpose of saving energy, improving energy efficiency, Put the construction industry from traditional wet type construction to advanced dry type construction, thus realizing residential parts production industrialization, modernization of technical equipment, intensive production and legal application promotion, construction and equipment integration.
At the same time also can reduce wall occupying space, increase the rate of using residential space, reduce structure load, promote building aseismic ability and safety performance, reduce the comprehensive cost. This product can be widely used in all kinds of high, multi-story building as nonbearing wall, also can be sound insulation, fire partition wall. This product's application is a new breakthrough of the world's wall materials reform, this wall panel have tested by the relevant institutions and its strength, sound insulation, fire resistant, radioactive, water resistance and other performance indexes all reach or over the relevant national standards.
How is the EPS Light weight wall board produced?
Take an EPS Wall Board production line with annual capacity 200,000m2 for example (700 m2 / day):
(1). An EPS Wall board production line with annual capacity 200,000m2.
(2).The raw materials cost to produce one square meter of EPS Wall board( take 90mm thickness panel for example).
| Materials |
Cement |
Fly ash |
EPS |
additive |
Silica panel |
Water and power |
Labor costs |
total |
| RMB/m2 |
8 |
3.4 |
6 |
0.5 |
13.4 |
0.52 |
3 |
34.82 |
(3).Costs above calculated based on the below cost table:
| Materials |
Cement(ton) |
Fly ash
(ton) |
EPS(ton) |
Additive(ton) |
Silica panel(m2) |
Water |
Power(kw) |
Worker salary(person/month) |
| Price(RMB) |
330 |
140 |
13000 |
5000 |
6.7 |
0.5 |
0.9 |
3000 |
(4).Other costs
| Cost categories |
Management costs |
Equipment depreciation |
Depreciation of buildings |
Maintenance Charge |
total |
| RMB/m2 |
1.00 |
0.50 |
0.30 |
0.20 |
2.00 |
(5).Based on the above table, the total production cost is: 37 RMB/m2.
(6).Annual Estimate Benefits
According to China domestic normal selling price:EXW 65RMB/m2
| Annual Output Value(RMB) |
Selling expense(RMB) |
Annual production cost(RMB) |
Annual Profits
(RMB) |
| 65×200,000m2 |
13,000,000×5% |
200,000x 37 |
13,000,000-650,000-7,400,000 |
| 13,000,000 |
650,000 |
7,400,000 |
4,950,000 |
How are the land,water,power required to set up an EPS light weight wall board production line?
Water requirements:
to produce 60m2 panel(9 cm thickness as example) required one ton of water. No special requirements for water quality, clean water can be used for production.
Electricity requirement: installed power 30 kw (depending on the capacity).
Requirements on air and steam:
Air compressor and boiler.
Land requirements: 1200-2000m2 workshop and 9 meters high (depending on the capacity).
Are your company is the manufacturer or trading company?
We are the direct factory,Hongfa company is the leading and the most influential manufacturer of the EPS light weight wall board making machine,concrete block making machine and other wall building materials in China from the 1990s.
Hongfa provides our clients one-stop solution for the EPS sandwich wall panel production line;from us
the clients can share our best quality machines and the most updated technology in the wall panel making industry.
How to contact your EPS wall board making machine factory?
Our company name: Guangxi Hongfa Heavy Machinery Co.,Ltd
Add: Yilingyan Industry Zone, Nanning City, Guangxi China
Sales Manager: Yuki Yang
Mobile: +86-18378813711
Audited Supplier 
){kind=link}